Recent events of this pandemic mean that more and more people, for their security and the safety of those around them, are continuing to wear masks. There is only one issue: when wearing a mask, the wearer may have a blurry vision because of the fogging, depending on how it is worn and the type of mask and glasses.

When wearing glasses, this is a part of life; they can cause the lenses to fog up occasionally. Changes in temperature, protective facial equipment, and winter gear are all common triggers.

It can mean struggling with foggy lenses to wear a protective face mask, and it's enough of an issue that you're no doubt looking for a solution. Thankfully, you should try a lot of different things. There's one of them bound to function. 

Why do Glasses Fog Up?

For one instance, glasses fog up. That explanation is a temperature difference. Your glasses can fog up when water vapor in the air condenses on the cold lenses if you are outside on a cold day and go back to a warm and humid space.

Your breath is the other contributing factor that masks and other facial devices cause. The mask you are wearing focuses your breath inward instead of outward. As the lining of your mouth and lungs are damp, your breath is also very moist. The wet, damp air you breathe outreaches your glasses' comparatively cold surface and condenses there. Because of surface friction, the droplets that grow on your glasses remain there and need to be rubbed off or left to evaporate, depending on the conditions. The challenge is, of course, because you just can't stop breathing. You can wash the moisture off the glasses, so there would only be more moisture re-condensed from your breath.

There are several different ways of attempting from different angles to inhibit this effect. Depending on the type of mask you wear, others function differently, such as the difference between a surgical mask or a full face-protective cap. Others involve the use of selected chemicals. Before you find one that fits well enough for you, try numerous solutions. That's why, after all, we're making as many as we are.

Adjusting your breathing is one option that isn't an option, but which we think worth considering. You can guide your breath downward instead of upward or outward with a small change to how you breathe out, which can reduce how much breath your lenses allow to fog them up. However, it is not ideal, and it can be awkward and painful on your neck muscles, so it is not a reasonable option. You can also combine it with other options on this list to make both of them more useful.

How to keep glasses fog-free with Mask

Seal It: One of the recommended tips is to change the fit to create a seal around an essential surgical mask's top edge. Simply twist the loops once and position them over your ears (when seen from the foot, they will create a figure eight). On the upper portion of the mask, turning the loops puts a slight downward strain, redirecting the breath, so it doesn't flow through the pupils. Pinch the mask over the nose bridge so that it suits appropriately.

Glass over the mask: Whatever sort of mask you wear, consider resting your eyeglasses on it after you have secured the mask to the bridge of your nose. A seal is formed by covering a quarter of the mask’s inch with the frame’s bottom. Just make sure you fully shield your nose and mouth as well.

Ensure no gap: You can cover the distance with surgical or athletic tape or even an elastic bandage if your mask is not sufficiently snug on the bridge of your nose.

More Air Flow: Try moving your glasses just a little further on your nose. This allows more oxygen to circulate so that your breath does not fog your view.

Opt for anti-fogging solutions: You can go for an anti-fogging spray or cream on your lenses or safety goggles. Since masks have become essential for us now, these solutions are widely available in online and offline stores. You may try using your glasses with soap and water as it is an effective DIY solution. But many say that the result is not quite promising. 

Order a coating for new lenses: Shaw recommends considering lenses with a permanent anti-fogging coating if you're buying new glasses. It stops the fogging that occurs as you move from a cold to a warm climate, such as when it's freezing outside, getting into your vehicle. During activities such as tennis or skiing, or any time you're hot and humid, it will even prevent the lenses from fogging up.

Do not avoid wearing your mask, no matter how problematic it can be. Masking helps avoid COVID-19 from spreading. Instead, follow our tips to keep your shades, safety goggles, or eyeglasses clear.

Unfortunately, for those who were not wearing safety masks when veiled, ophthalmologists are treating more injuries. They treated construction workers who, after removing foggy protective goggles, sustained ruptured eyeballs, and novice homeowners who did not feel they wanted to cover their eyes while completing minor tasks around the building.

Be sure that your mask or face covering protects your nose and mouth, No matter what you do to keep it away from fogging your glasses. And note, to help stop the transmission of coronavirus, you don't need a medical-grade N95 mask; such masks should be reserved for healthcare staff and others on the front lines battling the virus, public health authorities say.

Featured products

Best Selling
3M 9205+ mask | N95 mask x 20 | NIOSH - Clinical Supplies USA3M 9205+ mask | N95 mask x 20 | NIOSH - Clinical Supplies USA
3M 9205+ mask | N95 mask x 20 | NIOSH 47 reviews
Sale price$149.95
Best Selling
3M 8511 mask | N95 mask x 10 | NIOSH - Clinical Supplies USA3M 8511 mask | N95 mask x 10 | NIOSH - Clinical Supplies USA
3M 8511 mask | N95 mask x 10 | NIOSH 205 reviews
Sale price$79.95
Best Selling
3M 8210 mask | N95 mask x 20 | NIOSH - Clinical Supplies USA3M 8210 mask | N95 mask x 20 | NIOSH - Clinical Supplies USA
3M 8210 mask | N95 mask x 20 | NIOSH 502 reviews
Sale price$159.95